glenn
Junior Member
Posts: 68
|
Post by glenn on Sept 14, 2009 16:17:43 GMT -5
i've gotten oe styled mirrors but cant see a darn thing need help picking new one any thoughts? it's a gt 1 blue in color
|
|
|
|
Post by smyrnaguy on Sept 15, 2009 8:01:53 GMT -5
I bought a pair of Talbot style mirrors with built-in turn signal light from a guy in Cyprus on eBay. They weren't cheap. I think I paid about $160. I've since seen some that were very similar without the lights for $15. Not being sure of visibility I've elected to use a rearview camera that will be mounted in a small pod on the roof just behind the rear window. The pod will also contain satellite radio and GPS antennas. The camera feeds a 7" dash mounted monitor. I used the same type camera in my Hupmobile with great success. Its wide angle and night vision.
|
|
|
|
Post by modnar on Nov 1, 2009 12:37:51 GMT -5
go to www.mosmotors.comgo to AH Sprite/MG Midget (left panel w/blk background) click, in center column, down 4 to Exterior, click Mirrors, then Accessory Mirrors. we chose 165-500/165-400 Lucas style. They have the bullet style mirrors too. reasonable price, quick delivery, look like the original. can also use the turn signal assemblies here too. enjoy |
|
|
|
Post by robstone on Nov 1, 2009 13:05:07 GMT -5
|
|
|
|
Post by modnar on Nov 1, 2009 17:26:55 GMT -5
|
|
glenn
Junior Member
Posts: 68
|
Post by glenn on Nov 2, 2009 1:25:38 GMT -5
i found some ceapes from pep boys 10.00 each round the look ok and i can almost see what im going to be run over by ;D
|
|
|
|
Post by jspbtown on Nov 2, 2009 9:47:26 GMT -5
The talbot styled mirrors are available on EBAY pretty cheap, as well as through Factory Five. I used a set on the Brad I rebuilt. Getting them in the right spot where they will not interfer with the gulls is a challenge.  |
|
|
|
Post by mrbigh on Nov 2, 2009 13:28:45 GMT -5
i've gotten oe styled mirrors but cant see a darn thing need help picking new one any thoughts? it's a gt 1 blue in color I can show you what I installed on my GTII....... and also to display the newer Bradley Badges made by SKIP20 These mirrors are also remote controlled by a switch ( work in progress), made out of plastic, gray finish ready to paint and very economic, under 25 from JCW.........and still NO wipers.  |
|
|
|
Post by leonardabell on Nov 2, 2009 23:54:12 GMT -5
I stuck a pair of convex mirrors over the original mirror face. Sure, everything looks closer, but a get a way better field of vision.
|
|
|
|
Post by jmurch on Nov 3, 2009 0:27:29 GMT -5
i've gotten oe styled mirrors but cant see a darn thing need help picking new one any thoughts? it's a gt 1 blue in color I can show you what I installed on my GTII....... and also to display the newer Bradley Badges made by SKIP20These mirrors are also remote controlled by a switch ( work in progress), made out of plastic, gray finish ready to paint and very economic, under 25 from JCW.........and still NO wipers. Where are these mirrors from? Thanks, John |
|
|
|
Post by mrbigh on Nov 5, 2009 17:22:51 GMT -5
Where are these mirrors from? Thanks, John Hi John, I couldn't find the exact dealer from were I purchased these mirrors, it was over a year ago, but an small ebay search lead me to the same merchandise at almost the same price mirrorsHope that the information helps. |
|
|
|
Post by skip20 on Nov 6, 2009 9:09:24 GMT -5
Hey great looking mirrors. They look good on the door, not to big & sit level.
I have to make a note on these for mine GTII
Good looking Logo also.
Will be starting to work & post picture on mine Bradley (BRADLEY SS) soon.
Skip20
|
|
|
|
Post by rush2112fan on Jan 20, 2010 1:25:08 GMT -5
Greetings to Mrbigh and Skip20. I like both your ideas. My Bradley GTII project is now running, but needs a couple finishing touches, title, license and tires. The mirrors and logos would be a nice touch. I am glad I found this new site. Mrbigh, thanks for the link.
Skip20, I'll contact you on those logos.
Rush2112fan
|
|
|
|
Post by brianboggs on Jan 21, 2010 12:46:21 GMT -5
RUSH sucks ;D Just kidding. Been to many of their shows in Toronto back in the day. Welcome to the board.
|
|
gem
New Member
Posts: 7
|
Post by gem on Jan 29, 2010 11:31:58 GMT -5
here my latest that I decided to do while repairing the doors. I'm putting the mirrors in as part of the glass framing. The mirrors are Eclipse after-market (Manual w/TS lights). I cut off the base and added mounting bolts. The wedged plate was formed in metal and fit in the glass channel. It has a glass channel welded to it to accept the cut-down L-glass     GaryG |
|
