Invader GT build thread

[itfitz98]

Upon further inspection it apears as though the car was cut in half at one point unless they came that way and were reassembled at the time of the build....but I doubt it.

So here are the intitial issues:

1. seem across the middle of the car
2. Fuel tank in luggage area
3. 2x2 steel brace that goes from the tunnel to the roof and then the length of the roof
4. needs seats
5. was thinkiong of popping the body off to get the pan where I want it, but the brace in item #3 is kinda in the way.
6. its an invader


Here are some pics of that center bracket and seem

[itfitz98]

There is also some structual steel that runs back to support the tail end of the car as well as the ass end of the car. I am thinking that it will be very hard to split the body from the pan with that cross member being there.