GT2 Seat supports (Rizzo81) |

Wyn Global Moderator Forum Moderator Peidiwch ? mynd i'r afael ? phroblem rhy fawr. Gall troi a llosgi chi.rhy fawr. Posts: 399	GT2 Seat supports (Rizzo81) Mar 30, 2013 17:45:07 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Wyn on Mar 30, 2013 17:45:07 GMT -5 Rizzo81 I found the forth support today. These are the Bradley GT2 seat mounts. For my setup these will not work and are extras. If you need them I can sell them to you. Send me a PM. Wyn

Wyn
Global Moderator

Forum Moderator

Peidiwch ? mynd i'r afael ? phroblem rhy fawr. Gall troi a llosgi chi.rhy fawr.

Posts: 399

GT2 Seat supports (Rizzo81) Mar 30, 2013 18:17:58 GMT -5

Quote

Post by Wyn on Mar 30, 2013 18:17:58 GMT -5

Mar 26, 2013 17:14:09 GMT -5 rizzo81 said:

I need a seat frame to mount to the car. I have the top part that is attached to the seat but need the bottom. Its a 73 bug/ Bradley gt2. This is the very last part i need. Any info on where to get one or if anyone has one will be greatly appreciated. Thanks rizzo

Mar 27, 2013 8:32:38 GMT -5 jspbtown said:

Are you talking about the seat sliders? I belive they are universal sliders like these:
www.speedwaymotors.com/Universal-Seat-Sliders,7103.html

The universal sliders that jspbtown suggested should work with no problems. I used the Bradley seat support at the tunnel. I drilled extra holes in those brackets to make it a more gradule angle of the seats. My seats are too wide for the chassis I made. The tunnel is about 1/2" wider. So I made a onepeace seat mount to hold the sliders.

Wyn

rizzo81 Junior Member Posts: 67	GT2 Seat supports (Rizzo81) Mar 30, 2013 21:00:18 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by rizzo81 on Mar 30, 2013 21:00:18 GMT -5 I ordered the whole seat frame set up from the site jspb recommended. I will have pics up of what i as of now tomorrow hopefully. I sent you a pm back wyn i might just need those.

br: I see your looking for a Bradley for sale. I have one in Mid Michigan that is complete with the Gull wing doors. Have the original sales materials, invoices, correspondence with Bradley and instruction manuals. pine184@frontier.com Jul 19, 2022 14:32:20 GMT -5

deathtrap: Hello! Seriously interested in your car. I only need two things. I need more pictures, including pictures of the interior and engine compartment, and the transmission/rear axle area. Also need to know if this is an IRS car or a Swingaxle car. If you a Sept 16, 2022 8:04:13 GMT -5

quentin: There is a VINTAGE VDO JET thingyPIT TACHOMETER on eBay for $159. Looks good. Key search word is JET. I sold my rough one there for $120 if I recall. Oct 23, 2022 0:00:23 GMT -5

GT2 Seat supports (Rizzo81)

Post by Wyn on Mar 30, 2013 17:45:07 GMT -5

Post by Wyn on Mar 30, 2013 18:17:58 GMT -5

Post by rizzo81 on Mar 30, 2013 21:00:18 GMT -5

Shoutbox