|
|
Post by redrider808 on May 2, 2013 9:19:30 GMT -5
|
|
|
|
Post by cocacoladodge on May 2, 2013 21:52:06 GMT -5
Nice, love the BWA plate! On a 69? I'm guessing a singleport 1500 with swinger trans? Is she drivable the way she is or would you reccomend trailer? I am going to the Bug Run this sunday at the Martin dragstrip. ( www.us131msp.com for more info) I'll see if I can get someone interested for you, but I'll need more info. -any Floor Pan rust holes -engine size / mods (nice touch with the zoomie exauhst) -tran / suspntion type - brakes / functional(non?) all drum/disk&drum/all disk - wheels 4 lug / wide 5 / smaller size 5 (looks like sandard 4 lug) -ect |
|
|
|
Post by redrider808 on May 2, 2013 23:18:05 GMT -5
Nice, love the BWA plate! On a 69? I'm guessing a singleport 1500 with swinger trans? Is she drivable the way she is or would you reccomend trailer? I am going to the Bug Run this sunday at the Martin dragstrip. ( www.us131msp.com for more info) I'll see if I can get someone interested for you, but I'll need more info. -any Floor Pan rust holes -engine size / mods (nice touch with the zoomie exauhst) -tran / suspntion type - brakes / functional(non?) all drum/disk&drum/all disk - wheels 5 lug / wide 5 / smaller size 5 (looks like sandard 4 lug) -ect the last time I looked the pan looked fine. not sure what size the motor is as far as I know it's stock ' wheels are 5 lug brakes work but I would think have to to bleed then I will get over and look and see if it's drums or disk drum. I would say I would use a trailer to get it home. sorry not a bug guy |
|
|
|
Post by cocacoladodge on May 3, 2013 18:29:20 GMT -5
Ok, thanks for the update. I'll try to direct interested people your way. heres a crash course on what to look for to help in selling it
-If you get a chance, take a look at the intake tube, and where it bolts to the head. If where it bolts to the head looks like a single tube, then its more than likely a 1500. If the single tube splits into two tubes (they will be cast sideby side like a shotgun) then its a dualport, the normal size is a 1600...
-Wheels, ok they are 5 lug, are the lugs near the center of the wheel like most cars, or further out near to the rubber? if they are close to the tire its self it is a "wide 5" pattern
- If nothing major has been done with the bakes wihin the last 5 -10 years yu most likely hv 4 wheel drums
- Trans axel, there are 2 types...
1) swing axel (a long tube with inernal wokings) it will have a leather looking boot near the trans its self.
2) IRS (indepenant rear supention) looks like a cv shaft on most cars now days. with ribbed rubber boots on both ends.
Hope this helps some. The more you know about it, the easier it is to sell. Don't be afraid to ask questions on here, most everyone is more than helpful with sharing info.
|
|
|
|
Post by redrider808 on May 4, 2013 15:26:13 GMT -5
i just went and looked.
it is a dualport motor and has drums on the front and I guess you call in a small 5 lugs look like a normal car .
and it is a IRS rear.
and the pan looks good, light rust.
|
|
|
|
Post by cocacoladodge on May 5, 2013 15:42:01 GMT -5
Gave out 7 printoffs today at the BugRun from your craigslist post to interested people and told them the info you passed on here, so hopefully you'll get a bite. Good luck!
|
|
|
|
Post by redrider808 on May 5, 2013 21:09:44 GMT -5
thank you .
|
|
