Water for Fuel

[Gary Hammond]

Hi all,

I just witnessed a live demonstration last week of a 3500 watt generator set running on 5% gasoline and 95% water while pulling a 1000 watt electrical load of quartz work lights. The water to fuel conversion process only required 170 milliamps at 120 volts AC which is only 20.4 watts electrical power input.

This is a little understood process that extracts energy from water, and is completely different than electrolysis or burning of hydrogen. All the processes take place at the molecular level, not at the normal chemical reaction level. What happens inside the engine mimics what happens inside a thunder cloud when lightening causes water vapor to violently explode.

If you're interested in this, here's a link to H2 Global's web page which explains more about it. Enjoy!   H2 Global

Gary Hammond,

[Gary Hammond]

Hi All,

Here's a short video clip of the gen set running on 95% water and 5% gasoline. We first ran it on 22 ml of gasoline thru the carburetor. I would only run for 50 seconds, no load til it used up all the fuel.

Then we put 450 ml of tap water and another 22 ml of gasoline into the "Black Box" which was hooked up to the intake ahead of the carburetor. It was pulling the combustion air and mix of water and fuel vapors thru the "Black Box" to run the engine. It ran for a total of 19 minutes this way and was also pulling a 1000 watt load of quartz work lights for about 15 of that 19 minutes.



Gary Hammond,

[Gary Hammond]

Hi All,

I recently received an interesting news article about this technology which was written last October. I posted it on my home page and am providing a link to it for anyone who may be interested in reading it. WILL THIS BLACK BOX CHANGE THE WORLD?